angle section การใช้

• Henleaze Swimming Club also has an angling section for its lake users.
• The majority of the structure is made of 3mm aluminium plate and angle sections.
• In this instance the weight may be applied by running the drill pipe in compression in the high angle section.
• A custom-made " ferrinho " is usually 90 centimeters long, with a straight-angle section to ease handling.
• By 1939 he had developed an angled section made of steel with slots cut down one side and a long groove cut down the other.
• The component sections may typically include metal beams, channel and angle sections, with the lacing elements either metal plate strips, or angle sections.
• The component sections may typically include metal beams, channel and angle sections, with the lacing elements either metal plate strips, or angle sections.
• "' Notching "'is a metal-cutting process used on sheetmetal or thin barstock, sometimes on angle sections or tube.
• It is built of angle sections riveted together, as recommended in the engineering textbook " The Design of Highway Bridges " published in 1908.
• Finding it difficult to transport large, heavy, welded pieces, he turned to angled sections and sheets of steel and aluminum that could be bolted together on site.
• The portal struts and bracing make up a riveted unit which is bolted to the end posts . by wooden guard rails are boted to the bridge with angle sections.
• Construction of wooden-bodied vans resumed in 1902, but unlike the vans with wooden body frames of forty years earlier, these were built using iron angle section frames.
• The bridge employs laced channel sections for vertical compression members, paired eyebars for horizontal tension members and lower chord members, angle sections for overhead sway bracing and portal bracing, and crossed eyebars for top-lateral and bottom-lateral bracing.
• There may also be a number of different critical cases that require consideration, such as there being different values for orthogonal and principal axes and in the case of unequal angle sections in the principal axes there is a section modulus for each corner.
• Birmingham-based Accles & Pollock manufactured an initial batch which was delivered in late August, a week before the declaration of the Second World War on 3 September 1939, and Comino sold most of this angled section to local stores of Lillywhites, John Lewis and Selfridges.
• Alternatively, instead of fitting separate inner and outer DPCs, it is common in commercial housebuilding to use a one-piece length of rigid plastic, ( albeit an angled section ), which fits neatly across the cavity and slots into both walls ( a cavity tray ).
• Eventually, he worked out that by fitting one angled section into another and bolting them together through carefully positioned holes he could produce a very rigid joint, and, in addition to adjustable shelving, he began to develop ideas of what other structures could be created using the product.
• As of 2011 the plant's primary production is hot rolled long steel products including strip ( 4-10mm thick, 20-75mm width ), square ( 10-22mm ) and hexagonal ( 16-27mm ) rod, L angle sections ( 3-6mm thick, width 20-45mm ), round rod ( 10-32mm ) and wire ( 5.5-14mm ) and rebar ( 5.5-28mm ).